JEM Watercraft

Matt - why the wide transom?

Overall, I am liking the lines of this hull, but I don't get the wide transom... Unless you are planning for the boat to plane most of the time under sail...

MK:
Looks like I won't make it tonight...

Wife's job screwing up my plans again...

Think we could get together some weekend? I'd really like to see the boat.

Jerry

Congrats on the launch!

See you tomorrow night-
Jerry

Mullet_Key wrote:Jerry, I've decided to go to the Oct. Meeting. I don't want to cut into this months' speaker's time.

Are you still planning on bringing the boat?

Thanks,
Jerry

If by "saw Dust" you mean shavings from a table saw, or joiner, probably not. If it is dust from a sander, then yes. When I need to color match a piece of wood, I will use dust from my sander. If I don't have any handy, 60 grit on my 5" RO will make about a 1/4c-1/3c in 15 minuits. :l...

Are you still hopeing to take the boat to the PACK meeting? THat is next week, right? Let me know, if you would...


Thanks,
Jerry

You could write a book on that anwser. Or at least several chapters. Good place to start, New Kayak Workshop Nature of Boats The first is all about our small paddle boats, the second is more about big boats, but the rules are not that much diffrent between a kayak, row boat, displacment cruser, and ...

Works for Fillets too, but use a "Freezer" bag. The sandwhich and Storage bags will split seems. Kind of messy when that happens...

Jerry

Haven't been to a PACK meeting in about a yaer. I'll try to be there. Probably won't know for sure till tuseday at 5:00 or so, though...

Jerry

Also what do I use to remove the dust left in these small craters? Cheers Martin I use my shop vac with a "duster" brush attachment. In the beginning of my build, I used the wet rag, but found out the water will wick into pinholes and stay. Then when you re-coat with epoxy, the water make...