Worth mentioning but don't fit in other categories.
Dan0
Posts: 17 Joined: Sat Feb 13, 2010 3:45 amType of boat I like: Dk touring in progress
Post
by Dan0 Wed Feb 17, 2010 9:00 pm
Hello Builder/Paddlers,
I tried aluminum because was handy
and I don't like the larger holes needed for cable ties.
It worked great to stitch loosely but the aluminum broke when I tried to tighten the stitches.
Perhaps we need a new category " THINGS THAT DO NOT WORK" or something like that.
The BIG PICTURE is a college
jem
Site Admin
Posts: 4915 Joined: Fri Jun 18, 2004 8:14 pmType of boat I like: WoodenLocation: Greensboro, NC
Contact:
Post
by jem Wed Feb 17, 2010 10:03 pm
Trying new things and finding out if they work: called "experience".
-Matt. Designer.
OnkaBob
Posts: 401 Joined: Fri Jul 18, 2008 10:12 amType of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)Location: Seaford, South Oz
Post
by OnkaBob Wed Feb 17, 2010 10:04 pm
Nah, there wouldn't be enough capacity on the server to hold it all....
....and, yes, I'll put my hand up as a major contributor
.
Seriously though, if you use the smallest cable ties you can get the epoxy will fill the holes fairly well.
Cheers, Bob
Dan0
Posts: 17 Joined: Sat Feb 13, 2010 3:45 amType of boat I like: Dk touring in progress
Post
by Dan0 Thu Feb 18, 2010 6:27 am
Thanks Bob, I tried the smallest cable ties I could find but they would barely make the stitch loop and the latches would not hold for long.
Not to worry, I'll find another use for them at some point. Tie wire is working well.
The BIG PICTURE is a college
and I don't like the larger holes needed for cable ties.
.