Page 6 of 7

Re: How bout this?

Posted: Sun Nov 22, 2009 7:27 pm
by jem
Uncle John's has a set of nice little chair plans designed by our own Oldsparkey.

Re: How bout this?

Posted: Sun Nov 22, 2009 7:46 pm
by Yohan1973
jem wrote:Uncle John's has a set of nice little chair plans designed by our own Oldsparkey.
Is this it?
Image
http://www.unclejohns.com/boat/seat/default.htm

Re: How bout this?

Posted: Sun Nov 22, 2009 8:32 pm
by jem
yes

Re: How bout this?

Posted: Thu Nov 26, 2009 11:43 am
by jbo_c
Looks perfect. I'm definitely on board to pick up the plans. It'll be second on my build list, though. I'm in mid move right now, so I'm not getting any building done until the house sells.

Jbo

Re: How bout this?

Posted: Sat Nov 28, 2009 10:10 am
by jem
Drawings are complete. Assembly instructions are left to do.

Re: How bout this?

Posted: Sat Nov 28, 2009 10:39 am
by Oldsparkey
About the chair...... You could get one from these folks http://www.rockymountaindecor.com/produ ... -or-cherry It has a flat seat and I don't think it would be as comfortable as the one I dreamed up. Plus mine can be made from scrap wood or if you purchase the wood a lot less then the ones they have. But with theirs at $219.00 and on sale for $179.00 you do save $40.00 :lol: :lol: :lol:

If you make the chair to go with the boat Matt is designing , take some of the epoxy form making the boat and put a coat of it on the chair ( or two coats if you want to ) if it gets wet , no big deal.
A small piece of felt or rubber on the feet of the chair keeps it from sliding around... Contact cement works really good to put the non skid material on the feet of it.

Chuck.

Re: How bout this?

Posted: Sat Nov 28, 2009 9:01 pm
by Yohan1973
jem wrote:Drawings are complete. Assembly instructions are left to do.
HOT DANG! good news!
P.S.
Thanks for the info Oldsparkey.

Re: How bout this?

Posted: Sat Nov 28, 2009 11:14 pm
by jbo_c
Can you pull this one out of two sheets or will it take three?

Jbo

Re: How bout this?

Posted: Sun Nov 29, 2009 3:00 am
by olsnappa
jem wrote:Drawings are complete. Assembly instructions are left to do.
:D :D :D :D

Re: How bout this?

Posted: Sun Nov 29, 2009 8:48 am
by jem
jbo_c wrote:Can you pull this one out of two sheets or will it take three?

Jbo
4...well like 3-1/2.