Hybrids

Area for ideas about designs you want to see. Guests welcome to post!
tx river rat
Posts: 988
Joined: Wed Feb 21, 2007 10:48 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Tx

Re: Hybrids

Post by tx river rat » Tue Oct 20, 2009 11:05 pm

Tech
I dont know if I am smart are just hard headed enough to try stuff outside the bubble.
Come on you have an open invite anytime your ready.
I think you will find a lot of good builders and guys with good ideals from all over the world on this forum.
And Matt is a great designer that will work with you in any way he can.
Welcome
Ron

User avatar
Darrells
Posts: 347
Joined: Wed Oct 22, 2008 10:20 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Lorena,texas

Re: Hybrids

Post by Darrells » Wed Oct 21, 2009 8:04 pm

Phishtech,
Ron and I paddle,fish,camp and hunt together and you right he is a pretty smart feller. Builds a nice boat too. :D
Darrell Sykora

tx river rat
Posts: 988
Joined: Wed Feb 21, 2007 10:48 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Tx

Re: Hybrids

Post by tx river rat » Wed Oct 21, 2009 8:31 pm

Well folks,I think this is going to be a winner,building the panels with the curve in them gives you a machined edge to mate up to ,I have never had a boat stitch up so easily.
As you can see in the pic the boat had more twist than I though,I dont think thats a problem with the twist. also I dropped one of the sides off the horse when I was stitching it together ,a ply panel would have broken ,this never missed a lick.
So far I havent found a thing I dont like about building one this way.

Image

Now for you guys that want a really slick ss@g Matt says he can draw the panels full length with no problem. ,no splices, a whole lot less measuring,I have already figured out how to do it staplless.
Ron

OnkaBob
Posts: 388
Joined: Fri Jul 18, 2008 10:12 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Seaford, South Oz

Re: Hybrids

Post by OnkaBob » Wed Oct 21, 2009 10:22 pm

Ron, the problem with that hull is that it's in your shed and not mine :lol: . Jealousy really is a curse isn't it?

I notice the tops of your frames are flat which kind of brings us back to questions about the original point of this thread. Are you going to have a curved deck or stitched flat panels again? I really like a curved strip deck and want to know if it can be done without using a strongback.
Cheers, Bob

Laker 13 - christened and slimed (just).
Laker accessories underway.

tx river rat
Posts: 988
Joined: Wed Feb 21, 2007 10:48 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Tx

Re: Hybrids

Post by tx river rat » Thu Oct 22, 2009 10:34 am

Bob
I hate to say this but I dont like the curved decks,so mine will be a three section flat panel decks. If you go back to my Cuda build ,they will be close to that,a balanced deck ,same height front and back ,very low in front,pretty open cockpit. I like the square angles,I even drive a jeep,LOL also I found this design seems to be the best as far as paddling into the wind and weather cocking.
Plus I wanted a build that didnt have to have a strong back to build it
Ron

User avatar
Oldsparkey
Design Reviewer
Posts: 1272
Joined: Sat Jun 19, 2004 11:08 am
Type of boat I like: Wood boats .
Location: Somewhere around Central Florida
Contact:

Re: Hybrids

Post by Oldsparkey » Thu Oct 22, 2009 4:18 pm

tx river rat wrote: I like the square angles,I even drive a jeep,LOL also I found this design seems to be the best as far as paddling into the wind and weather cocking.

Ron
Not to hijack your thread , just to set the record straight....... :lol:
OK , Ron , Careful about what you say concerning the Jeep , remember others ( like myself) drive them and consider them the Classic Vehicle Design for the outdoors man. An Icon of the wilderness and exploring not to even mention freedom of a vehicle that will go anywhere that only they can deliver. Almost like a Pirogue or Canoe as far as representing the greatness of the outdoors and being there , a free spirit for our everyday enjoyment. :D

Jezeeee , they are even better at it then a floppy felt hat , Lace up hunting boots , a red and black checkered shirt and a pipe emitting that wonderful smell of good tobacco while the smoker sits by a campfire or fireplace with his best furry 4 footed buddy curled up by his side. I guess the word I am looking for is ....... Traditionalist.

OK ... I have to admit , the smell of a wood boat coming together and the sawdust , epoxy and fiberglass is almost as enjoyable , if not more , especially the anticipation of when you are going to get to paddle it and have all that fun with it.

Matt... Before you say anything .......I promise you..... :oops:
Off to the corner and I promise I will sit there for a while , contemplating what I said on here while tieing some artificial flys to use for fishing. :lol:

Chuck.
PS. That is our little piece of sanity in this Krazy World.
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler

LEE SCHNEIDERMANN
Posts: 220
Joined: Tue May 08, 2007 10:31 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Cedar Rapids, Iowa

Re: Hybrids

Post by LEE SCHNEIDERMANN » Thu Oct 22, 2009 9:11 pm

I agree with your thoughts about a hybrid option.
Image
There are three kinds of people in this world.
Those who can do math, and those who can't.

tx river rat
Posts: 988
Joined: Wed Feb 21, 2007 10:48 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Tx

Re: Hybrids

Post by tx river rat » Tue Nov 10, 2009 11:39 pm

Ok the jury is in,I like this construction so well that I think all the builds I make from now on will be ss@g.
Ron

Post Reply