I have built several stitch and glue canoes in the past. Can you provide more design or "hydrostatic" data for your boats? Bow and Stern rocker, wetted surface area, waterline length, waterline beam, prismatic coefficent, hull speed, etc?
I am particulary interested in the Freedom 15 and 11 Kayaks.
The lines look good and I would like more info to base my choices on.
Thanks for any information
Derek G
Design Data
-
- Site Admin
- Posts: 4915
- Joined: Fri Jun 18, 2004 8:14 pm
- Type of boat I like: Wooden
- Location: Greensboro, NC
- Contact:
to get a good side-by-comparison, I'll need to know about how much weight you'll have on board.
Keep in mind these are recreational cruisers. There will be a large speed difference between the 11 and 15.
I suppose I need to come up with a 13' model sometime in the future to bride the gap.
Keep in mind these are recreational cruisers. There will be a large speed difference between the 11 and 15.
I suppose I need to come up with a 13' model sometime in the future to bride the gap.
-Matt. Designer.