Forming Jigs
-
- Posts: 64
- Joined: Fri Jun 22, 2007 5:15 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Katy, TX
Forming Jigs
Included in the plans are two pages that have no title block. They have patterns for bow and stern forming jigs. However, they are not included in the 8.5" X 11" instructions. How do you use these forming jigs? I figure it's pretty important about now since I am stitching up the hull. Thanks in advance.
-
- Site Admin
- Posts: 4915
- Joined: Fri Jun 18, 2004 8:14 pm
- Type of boat I like: Wooden
- Location: Greensboro, NC
- Contact:
Check out this page.
viewtopic.php?t=588&postdays=0&postorder=asc&start=15
That will provide a good visual explanation.
viewtopic.php?t=588&postdays=0&postorder=asc&start=15
That will provide a good visual explanation.
-Matt. Designer.
-
- Posts: 64
- Joined: Fri Jun 22, 2007 5:15 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Katy, TX
Awesome
That'll work great! I'm sorry, I'm sure Ive seen this post before. For some reason I thought "inner piece" and "outer piece" meant inside and outside the hull and it wasn't making any sense. Nobody ever accused me of being very smart.
Thanks matt, for your usual quick response. My experience with JEM has been most pleasant. I never knew building a boat could be so rewarding.
Thanks matt, for your usual quick response. My experience with JEM has been most pleasant. I never knew building a boat could be so rewarding.