16 Sea Power

Ask your questions here. Guests welcome to post!
Post Reply
fred4win
Posts: 6
Joined: Wed Feb 09, 2011 6:34 am
Type of boat I like: 16 Sea Power

16 Sea Power

Post by fred4win »

I really like the 16 Sea Power and I am getting ready to order the plans...I would love to build this boat Open without the cab on the boat...Need to bring the weight down below 300 lbs. Does any one know if that is Possible. Also I live in the Philippines Iloilo and the water is always choppy and need this boat for that reason...Does any one know the dead rise of the boat fore at the cut water and aft on the stern. I built the 12 flex garvey last year and it is a great little boat. I have a 15 hp on it and I will the you when the water is calm you think you are flying, but unable to handle the chop very good with out pounding.
fred
cridgie down under
Posts: 90
Joined: Sun Jul 27, 2008 6:57 am

Re: 16 Sea Power

Post by cridgie down under »

is this a jem watercraft design, i cant find it .
await your reply
regards cridgie down under
fred4win
Posts: 6
Joined: Wed Feb 09, 2011 6:34 am
Type of boat I like: 16 Sea Power

Re: 16 Sea Power

Post by fred4win »

I may be in the wrong part of the forum. ?This is one of mortens boat plans. I will go back a check the forums again. Thank you cridgie down under to the alert.
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: 16 Sea Power

Post by jem »

Morten shared part of the forum with me. I'll let him know there's a question for him.
-Matt. Designer.
fred4win
Posts: 6
Joined: Wed Feb 09, 2011 6:34 am
Type of boat I like: 16 Sea Power

Re: 16 Sea Power

Post by fred4win »

Thanks Matt. You guys are so kind to the newbies...I will be more careful the next post.
Post Reply