JEM Watercraft
http://www.jemwatercraft.com/forum/

re-coating an old finish
http://www.jemwatercraft.com/forum/viewtopic.php?f=5&t=3820
Page 1 of 1

Author:  LEE SCHNEIDERMANN [ Mon Jul 09, 2012 10:42 pm ]
Post subject:  re-coating an old finish

I'm sure this is covered somewhere, but I couldn't find it.
I'm about to re-coat the hull on the wife's Freedom 15.
Everything is sanded, but I'm wondering if I should wipe it down with a chemical wash to insure a good bond between the old epoxy & the new?

Lee

Author:  jem [ Tue Jul 10, 2012 6:19 am ]
Post subject:  Re: re-coating an old finish

A light scrub with acetone wouldn't hurt. But sanding should have taken care of things.

Author:  LEE SCHNEIDERMANN [ Tue Jul 10, 2012 4:49 pm ]
Post subject:  Re: re-coating an old finish

Thanks Matt.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/