JEM Watercraft
http://www.jemwatercraft.com/forum/

Freedom 13 plywood weight..
http://www.jemwatercraft.com/forum/viewtopic.php?f=5&t=3978
Page 1 of 1

Author:  warf [ Thu Sep 18, 2014 12:04 pm ]
Post subject:  Freedom 13 plywood weight..

New guy here but long time boat builder. Just ordered plans from Matt for the Freedom 13.
Question is if I make the hull out of Okoume ply and the deck out of the darker brown Meranti in the same thickness any idea how much weight increase I would pick up?

Okoume is supposed to weigh 13 lbs for a sheet and Meranti about19 lbs per sheet. I really like the clear finished look of Meranti over the light brown of Okoume ply but don't want to pick up to much weight increase...Thanks guys.

Author:  jem [ Thu Sep 18, 2014 7:31 pm ]
Post subject:  Re: Freedom 13 plywood weight..

If it's 4mm, about 4 pounds more.

If it's 3mm, about 3 pounds more.

Both assume you're including the coaming.

Author:  warf [ Thu Sep 18, 2014 8:04 pm ]
Post subject:  Re: Freedom 13 plywood weight..

Thanks much Matt, that's about what I thought. Got the plans from you this afternoon, nice work and great detail. I have build a lot of boats from plans and yours would rate at the top of the list for quality, once again nice work!...

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/