Page 1 of 1

Trapper 15.38 bow/stern jig.

Posted: Fri Jun 05, 2015 12:32 pm
by LesForgue
Matt,

on page 15 of the 37 page instructions, it says Check to ensure the bow/stern jig is vertical.
But a bow/stern jig is not mentioned or pictured anywhere else in the instructions/plans for the Trapper 15-38.

Of course I could check that the bows themselves are vertical at that point,
but I'm wondering about the jig, am I missing something that would help the build come out better?

Thanks
Les

Re: Trapper 15.38 bow/stern jig.

Posted: Fri Jun 05, 2015 5:58 pm
by jem
LesForgue wrote:Matt,

on page 15 of the 37 page instructions, it says Check to ensure the bow/stern jig is vertical.
But a bow/stern jig is not mentioned or pictured anywhere else in the instructions/plans for the Trapper 15-38.

Of course I could check that the bows themselves are vertical at that point,
but I'm wondering about the jig, am I missing something that would help the build come out better?

Thanks
Les
Should have this in the plans

Image

Re: Trapper 15.38 bow/stern jig.

Posted: Wed Jun 10, 2015 2:56 pm
by LesForgue
Hi Matt,

I do not have that image on any of the instruction or plan pages.
Can you email me a picture of that bow alignment jig drawing,
showing dimensions, and with a little instruction on how to use it? les.forgue@fisglobal.com

What I do have is:

Pages 1 thru 37 of Trapper Build Instructions Rev00 - 02/15/09.

Thirteen 11x17 Trapper 15-38 Plans pages =
- Rev 00 - 02/24/09 Reference
- Rev 00 - 02/24/09 Nesting
- Rev 00 - 02/24/09 Sheet 1.1
- Rev 00 - 02/24/09 Sheet 1.2
- Rev 00 - 02/24/09 Sheet 3
- Full Scale pattern end of panel 1
- Full Scale pattern end of panels 2 & 3
- Full Scale pattern end of panel 4 Left, showing actual end
- Full Scale pattern end of panel 4 Right, showing approach to end
- Rev 00 - 02/24/09 Frames
- Rev 00 - 02/24/09 QA 1
- Rev 00 - 02/24/09 QA 2
- Rev 00 - 02/24/09 Frame REF
THANKS!

Re: Trapper 15.38 bow/stern jig.

Posted: Fri Jun 12, 2015 5:45 am
by jem
I'll try and get you something today.

Re: Trapper 15.38 bow/stern jig.

Posted: Fri Jun 12, 2015 7:29 am
by LesForgue
Thanks Matt.

Re: Trapper 15.38 bow/stern jig.

Posted: Fri Jun 12, 2015 8:53 am
by jem
Check your inbox.

Re: Trapper 15.38 bow/stern jig.

Posted: Sat Jun 13, 2015 11:18 pm
by LesForgue
Got it
Thanks much.