Page 1 of 1
Trapper 15.38 bow/stern jig.
Posted: Fri Jun 05, 2015 12:32 pm
by LesForgue
Matt,
on page 15 of the 37 page instructions, it says Check to ensure the bow/stern jig is vertical.
But a bow/stern jig is not mentioned or pictured anywhere else in the instructions/plans for the Trapper 15-38.
Of course I could check that the bows themselves are vertical at that point,
but I'm wondering about the jig, am I missing something that would help the build come out better?
Thanks
Les
Re: Trapper 15.38 bow/stern jig.
Posted: Fri Jun 05, 2015 5:58 pm
by jem
LesForgue wrote:Matt,
on page 15 of the 37 page instructions, it says Check to ensure the bow/stern jig is vertical.
But a bow/stern jig is not mentioned or pictured anywhere else in the instructions/plans for the Trapper 15-38.
Of course I could check that the bows themselves are vertical at that point,
but I'm wondering about the jig, am I missing something that would help the build come out better?
Thanks
Les
Should have this in the plans
Re: Trapper 15.38 bow/stern jig.
Posted: Wed Jun 10, 2015 2:56 pm
by LesForgue
Hi Matt,
I do not have that image on any of the instruction or plan pages.
Can you email me a picture of that bow alignment jig drawing,
showing dimensions, and with a little instruction on how to use it?
les.forgue@fisglobal.com
What I do have is:
Pages 1 thru 37 of Trapper Build Instructions Rev00 - 02/15/09.
Thirteen 11x17 Trapper 15-38 Plans pages =
- Rev 00 - 02/24/09 Reference
- Rev 00 - 02/24/09 Nesting
- Rev 00 - 02/24/09 Sheet 1.1
- Rev 00 - 02/24/09 Sheet 1.2
- Rev 00 - 02/24/09 Sheet 3
- Full Scale pattern end of panel 1
- Full Scale pattern end of panels 2 & 3
- Full Scale pattern end of panel 4 Left, showing actual end
- Full Scale pattern end of panel 4 Right, showing approach to end
- Rev 00 - 02/24/09 Frames
- Rev 00 - 02/24/09 QA 1
- Rev 00 - 02/24/09 QA 2
- Rev 00 - 02/24/09 Frame REF
THANKS
!
Re: Trapper 15.38 bow/stern jig.
Posted: Fri Jun 12, 2015 5:45 am
by jem
I'll try and get you something today.
Re: Trapper 15.38 bow/stern jig.
Posted: Fri Jun 12, 2015 7:29 am
by LesForgue
Thanks Matt.
Re: Trapper 15.38 bow/stern jig.
Posted: Fri Jun 12, 2015 8:53 am
by jem
Check your inbox.
Re: Trapper 15.38 bow/stern jig.
Posted: Sat Jun 13, 2015 11:18 pm
by LesForgue
Got it
Thanks much.