Page 1 of 1
frame for sabalo 15
Posted: Sat Mar 26, 2016 11:29 am
by jonico
Hello,
anyone knows the size of the central panel which used goanywhere. I refer to what I said at the end of the cockpit to make ice/fish box between the cockpit and tankwell
I would do the same thing for my sabalo 15.
thank you and sorry for writing errors
edoardo
Re: frame for sabalo 15
Posted: Wed Mar 30, 2016 6:02 am
by jem
This is a frame on the plans?
Re: frame for sabalo 15
Posted: Wed Mar 30, 2016 1:56 pm
by jonico
Hello Jem and thanks for the reply. I'm sorry, but i do not understand.
this is not on the plans. in the plans we have two temp frame forward cockpit and one for the tankwell.
I refer to the frame to be installed at the end of the frame cockpit near tankwell
Re: frame for sabalo 15
Posted: Sat Apr 02, 2016 10:18 am
by jem
If you email me at
info@jemwatercraft.com I'll send you a drawing of a frame tht can fit right behind the cockpit to create a seale compartment.
Re: frame for sabalo 15
Posted: Sat Apr 02, 2016 3:21 pm
by jonico
ok. thanks, jem
Re: frame for sabalo 15
Posted: Mon Apr 11, 2016 6:44 am
by OnkaBob
Matt, I'm not certain but I think Edoardo is interested in copying the cockpit / ice box built into the Sabalo built by member Goanywhere as shown on the page in the link below.
viewtopic.php?f=8&t=3426&start=130
Edoardo, is this what you are asking about?
Re: frame for sabalo 15
Posted: Sun May 22, 2016 11:38 am
by jonico
Sorry.
I intend to fiberglassing before the inner hull completely. cutting for the mirage drive must be done before or after?
thank you