frame for sabalo 15

Ask your questions here. Guests welcome to post!
Post Reply
jonico
Posts: 4
Joined: Thu Jul 09, 2015 4:30 am
Type of boat I like: sit on top kayak-sabalo

frame for sabalo 15

Post by jonico » Sat Mar 26, 2016 11:29 am

Hello,
anyone knows the size of the central panel which used goanywhere. I refer to what I said at the end of the cockpit to make ice/fish box between the cockpit and tankwell
I would do the same thing for my sabalo 15.
thank you and sorry for writing errors
edoardo

User avatar
jem
Site Admin
Posts: 4859
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: frame for sabalo 15

Post by jem » Wed Mar 30, 2016 6:02 am

This is a frame on the plans?
-Matt. Designer.

jonico
Posts: 4
Joined: Thu Jul 09, 2015 4:30 am
Type of boat I like: sit on top kayak-sabalo

Re: frame for sabalo 15

Post by jonico » Wed Mar 30, 2016 1:56 pm

Hello Jem and thanks for the reply. I'm sorry, but i do not understand.
this is not on the plans. in the plans we have two temp frame forward cockpit and one for the tankwell.
I refer to the frame to be installed at the end of the frame cockpit near tankwell

User avatar
jem
Site Admin
Posts: 4859
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: frame for sabalo 15

Post by jem » Sat Apr 02, 2016 10:18 am

If you email me at info@jemwatercraft.com I'll send you a drawing of a frame tht can fit right behind the cockpit to create a seale compartment.
-Matt. Designer.

jonico
Posts: 4
Joined: Thu Jul 09, 2015 4:30 am
Type of boat I like: sit on top kayak-sabalo

Re: frame for sabalo 15

Post by jonico » Sat Apr 02, 2016 3:21 pm

ok. thanks, jem

OnkaBob
Posts: 388
Joined: Fri Jul 18, 2008 10:12 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Seaford, South Oz

Re: frame for sabalo 15

Post by OnkaBob » Mon Apr 11, 2016 6:44 am

Matt, I'm not certain but I think Edoardo is interested in copying the cockpit / ice box built into the Sabalo built by member Goanywhere as shown on the page in the link below.

viewtopic.php?f=8&t=3426&start=130

Edoardo, is this what you are asking about?
Cheers, Bob

Laker 13 - christened and slimed (just).
Laker accessories underway.

jonico
Posts: 4
Joined: Thu Jul 09, 2015 4:30 am
Type of boat I like: sit on top kayak-sabalo

Re: frame for sabalo 15

Post by jonico » Sun May 22, 2016 11:38 am

Sorry.
I intend to fiberglassing before the inner hull completely. cutting for the mirage drive must be done before or after?
thank you

Post Reply