JEM Watercraft

It took awhile but she is finished. Was my first build but I think it turned out pretty good. made a few mistakes and learned alot for the Freedom 15 I will starting shortly. glassed inside and out, bottom is graphite and seat and base are removable for a camp chair. Also i would like to say thanks for all of the advice along the way.

nice work!

Very nice work

Joe W.

Good Job, Nice boat.

Jimmy

Thats one nice boat...........I also like the two tone effect

It kinda looks right

You should be proud. I really like the black graphite extending up the stem and stern "posts". Nice masking tape work.

I didn't see in your post... what was the paint you used for the light drab green?

[quote][/quote]what was the paint you used for the light drab green?

It is a Sherwin-Williams latex paint. The color Believe it or not is " Sawdust"

As far as the masking job I cheated. I made a small cross out of 1x2 and drilled a hole the size of a pencil how far down I wanted the graphite, ran that around the boat and then taped the pencil line. Nice and straight

Of course the boat was upside down at that time

I picked my endpoints, then snapped a chalkline, and taped to it. Whatever gets the job done.