TV 15-32 overdue post

Builder show and discuss their progress.
TexasZeke
Posts: 20
Joined: Tue May 26, 2009 11:33 am
Type of boat I like: touring t-v

TV 15-32 overdue post

Post by TexasZeke »

I keep meaning to post this and then one thing or the other comes up. I've finally got a little time so I will try to rectify this.
Guess a little background is in order. This is my second boat. First was built from a combination of a couple of sets of free plans. It was most built as a test vehicle and learning tool. It was built with what I have heard called rib and screw, very little fiberglass at all. From start to finish I had 11 days invested and most of that in waiting for the paint to dry.
Image
So far I've got about two and a half weeks in this one and guessing maybe halfway through
starting to put the pieces together
Image
Image
all wired up
Image
Image
external filets started
Image
outside filets finished and sanded
Image
Image
external cloth applied and internal filets applied
Image
Image
hopefully I put the last fill coat on the exterior tonight and can start finishing out the inside tomorrow.
So far it's going pretty good I think, being that it's my first stitch and glue boat. The only problem I have encountered so far is when I was putting the cloth on the hull, where the tumblehomes were resting on the sawhorses I developed a wave in them that I will have to work out. I will say this, from what I can see so far I think this is going to be a great boat

kevin
LIGHT KEEPER'S KID
Posts: 212
Joined: Thu Dec 18, 2008 11:42 am
Type of boat I like: WADEFISH 15x32
Location: Round Rock,Texas___Wadefish 15x32 (OlllllO)

Re: TV 15-32 overdue post

Post by LIGHT KEEPER'S KID »

8) Looks Great :wink:

Mike
The wise man in the storm prays to God, not for safety from danger, but for deliverance from fear.
__Ralph Waldo Emerson
craiggamesh
Posts: 465
Joined: Mon Aug 04, 2008 12:01 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Portland, Oregon

Re: TV 15-32 overdue post

Post by craiggamesh »

The beauty of already having the previously made boat, is that the second one can take as long as you want. You can use the old while building the new. :D
Regards,

Craig
------------------------------------------------------
If I had more clamps, I could build more boats.
Image
Bemm 52
Posts: 309
Joined: Wed Feb 13, 2008 3:57 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Sydney Aust

Re: TV 15-32 overdue post

Post by Bemm 52 »

craiggamesh wrote:The beauty of already having the previously made boat, is that the second one can take as long as you want. You can use the old while building the new. :D
All good.......... unless you've got an impatient other half :shock: :roll: :lol: :lol:

Boats lookin good Kevin......... looks like you use those catfish jug things too

I don't think we would be allowed to use them here........authorities are a bit funny about lines that are not hand held..........however the pros would probably be able to use them
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: TV 15-32 overdue post

Post by jem »

8) 8) 8)
-Matt. Designer.
Oldsparkey
Design Reviewer
Posts: 1272
Joined: Sat Jun 19, 2004 11:08 am
Type of boat I like: Wood boats .
Location: Somewhere around Central Florida
Contact:

Re: TV 15-32 overdue post

Post by Oldsparkey »

TexasZeke wrote: The only problem I have encountered so far is when I was putting the cloth on the hull, where the tumblehomes were resting on the sawhorses I developed a wave in them that I will have to work out. I will say this, from what I can see so far I think this is going to be a great boat

kevin
Kevin....

When you attach the railing it should take that wave out and fair the sides up for you. :D

Chuck
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
CrkdLtr
Posts: 79
Joined: Thu Feb 19, 2009 11:51 am
Type of boat I like: Pirogue

Re: TV 15-32 overdue post

Post by CrkdLtr »

Nice job so far. This is about where I am currently.
TexasZeke
Posts: 20
Joined: Tue May 26, 2009 11:33 am
Type of boat I like: touring t-v

Re: TV 15-32 overdue post

Post by TexasZeke »

Oldsparkey wrote:
TexasZeke wrote: The only problem I have encountered so far is when I was putting the cloth on the hull, where the tumblehomes were resting on the sawhorses I developed a wave in them that I will have to work out. I will say this, from what I can see so far I think this is going to be a great boat

kevin
Kevin....

When you attach the railing it should take that wave out and fair the sides up for you. :D

Chuck
that's what I'm hoping

Question: my plans call for a 3/4" thick breast hook or end cap on each end. I plan on putting a deck on the front extending back about 4' and one on the back extending forward about 3'. Does all of this need to be 3/4" thick? Does any of it? Or how thick would yall make it?

thanks
kevin
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: TV 15-32 overdue post

Post by jem »

Only part that has to have solid thickness, gunwale to gunwale, is any end spot you'd grab onto to pull out of the water, drag on the beach, etc.
-Matt. Designer.
Derek Bowen
Posts: 23
Joined: Thu Dec 25, 2008 2:41 pm

Re: TV 15-32 overdue post

Post by Derek Bowen »

Kevin, 6mm deck will do for a small boat with a 20mm or 25mm stiffener where you will grab her for hauling, as Matt says, Strength where you need it.
Post Reply