okwata 15 build

Builder show and discuss their progress.
Post Reply
cridgie down under
Posts: 90
Joined: Sun Jul 27, 2008 6:57 am

okwata 15 build

Post by cridgie down under »

Hi matt today i starting plotting my ply ,and am now ready to start cutting .
Your plans "are an absolute delight to work with". I only have 1 query and i am hesitant to ask as i feel the answer to my question will probably be "oh why didn"t i think of that."

1. on the bulkhead drawings 1 to 5 there is a horizontal dotted line across each one,
a measurement is given up from the bottom ,what does this measurement and line relate to ?

Kind regards
Ray
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: okwata 15 build

Post by jem »

That's an estimated waterline. It's for reference. If you wanted to set up your frames in a strongback fashion on a flat bench for building, then use some 1x2 timber cut to the same length and mount them to that line on all frames.
-Matt. Designer.
cridgie down under
Posts: 90
Joined: Sun Jul 27, 2008 6:57 am

Re: okwata 15 build

Post by cridgie down under »

Thanks Matt i thought i must have overlooked something.
Ray
Post Reply