Page 3 of 3

Re: Upcoming Sabalo build in Australia - Now Started

Posted: Fri Apr 06, 2012 8:22 pm
by cjbfisher
Managed to sneak in a few hours yesterday. Spent most of the time thinking and re-aquainting myself. Managed to tape the external seams of the tankwell, work out the position of the foot braces, and cut out the cockpit for the footbrace reccess.
No photos. Might get some today.
Cheers,
Chris

Re: Upcoming Sabalo build in Australia - Now Started

Posted: Thu Apr 12, 2012 2:30 am
by Bemm 52
cjbfisher wrote:
Image
Cjb...........lookin good............ I would extend the storage locker as Tor suggests, also I would make sure it is sealed from the rest of the boat so any water that gets in does'nt, flow all through the whole hull.

Cheers Paul

Re: Upcoming Sabalo build in Australia - Now Started

Posted: Sat May 05, 2012 7:29 pm
by goanywhere
Looking very nice. I agree, angling the access hatch back a bit might make life easier, especially on the water. Not too much otherwise you might lose some advantage that having a nice work/mounting platform will give you.

You've done a very neat job and she's nice and straight. Well done!

By the way, for other reasons I painted my Sabalo up to the gunwales and I am not disappointed at all with the look. I get lot's of comments every time I go out. So don't worry about 'spoiling' the look because of painting your boat.

Re: Upcoming Sabalo build in Australia - Now Started

Posted: Mon May 07, 2012 7:29 pm
by cjbfisher
goanywhere wrote:Looking very nice. I agree, angling the access hatch back a bit might make life easier, especially on the water. Not too much otherwise you might lose some advantage that having a nice work/mounting platform will give you.

You've done a very neat job and she's nice and straight. Well done!

By the way, for other reasons I painted my Sabalo up to the gunwales and I am not disappointed at all with the look. I get lot's of comments every time I go out. So don't worry about 'spoiling' the look because of painting your boat.
Thanks Steve.
Have you got any details of your mast step? After reading all the trip reports on AKFF about the guys sailing their AI's, the gears have started to clunk, and I'm contemplating setting up for sailing. Also where did your design for the outriggers come from?
Cheers,
Chris

Re: Upcoming Sabalo build in Australia - Now Started

Posted: Thu May 17, 2012 6:48 pm
by goanywhere
Hi Chris, here are a couple of videos I took last night. I hope they're ok, I had all sorts of problems trying to upload them to Photobucket, but I think they are ok now.

I hope these answer your questions.

Image

Image