So I set up my table saw & cut out a 6mm groove
Drilled it all out
Glued some 6mm Ally plate in
Then fitted it back to the boat
Broken Rudder
-
PiratePete
- Posts: 305
- Joined: Fri Sep 11, 2009 6:57 am
- Type of boat I like: Wadefish + Mirarge Drive.
- Location: Tassie, Australia
Broken Rudder
The last time I used my Wadefish I had a little OOOOooooopps
So I set up my table saw & cut out a 6mm groove
Drilled it all out
Glued some 6mm Ally plate in
Then fitted it back to the boat
So I set up my table saw & cut out a 6mm groove
Drilled it all out
Glued some 6mm Ally plate in
Then fitted it back to the boat
-
Manjimike
- Posts: 146
- Joined: Fri Aug 25, 2006 7:28 am
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Manjimup, West Australia
Re: Broken Rudder
I repaired the blade on a Tiger cat the same way after running across a bommie 
Made it very strong
Made it very strong