A Pirogue by Keith

Builder show and discuss their progress.
User avatar
jem
Site Admin
Posts: 4875
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Post by jem » Sat Apr 19, 2008 8:33 pm

When you stitch it together, all but just a little bit of that waviness will disappear. When you install the gunwales, the rest will disappear.
-Matt. Designer.

User avatar
coogzilla
Posts: 101
Joined: Sat Apr 05, 2008 4:27 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Southern California

Post by coogzilla » Tue Apr 22, 2008 10:46 pm

I stacked the side panels to drill some holes and their off 1/4" . Oops. Took a break from the belt sander.

This is a great reason to start with a less
complicated boat. I try my best and goof anyhow.
I think it will be ok anyhows. I'm learnin, I think.

Thank's Matt. I appreciate help

User avatar
coogzilla
Posts: 101
Joined: Sat Apr 05, 2008 4:27 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Southern California

Post by coogzilla » Wed Apr 23, 2008 11:40 pm

Image

Image


8) Keith

User avatar
coogzilla
Posts: 101
Joined: Sat Apr 05, 2008 4:27 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Southern California

Post by coogzilla » Sun Apr 27, 2008 1:41 am

It's starting to look like a pirogue!

Image


Image



Keith

User avatar
coogzilla
Posts: 101
Joined: Sat Apr 05, 2008 4:27 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Southern California

Post by coogzilla » Sun Apr 27, 2008 3:27 am

Image

My helpers.


(they like to argue) Just funnin

Keith

User avatar
coogzilla
Posts: 101
Joined: Sat Apr 05, 2008 4:27 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Southern California

Post by coogzilla » Tue Apr 29, 2008 1:45 am

Oops. fell off my "special" boat stands.

Image

User avatar
coogzilla
Posts: 101
Joined: Sat Apr 05, 2008 4:27 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Southern California

Post by coogzilla » Thu May 01, 2008 6:27 am

Sanding paid off. Looks a little bit better. Waiting for glass cloth.

Image


Regard's Keith
JEMWATERCRAFT:
Touring Pirogue-

User avatar
coogzilla
Posts: 101
Joined: Sat Apr 05, 2008 4:27 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Southern California

Post by coogzilla » Thu May 08, 2008 5:36 pm

Some more work. Got it faired up pretty good despite my work.
The sheer clamps are just a couple fairing battens. The real ones
are mahogony. (-;


Image

Image

Coog
JEMWATERCRAFT:
Touring Pirogue-

User avatar
coogzilla
Posts: 101
Joined: Sat Apr 05, 2008 4:27 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Southern California

Post by coogzilla » Thu May 08, 2008 7:15 pm

My helper, not real good at marking out cuts

Image

Helped get the sheer level pretty good.

Image

Coog.

sheetsrep
Posts: 5
Joined: Tue Mar 18, 2008 8:51 pm

Post by sheetsrep » Thu May 08, 2008 8:47 pm

Dude! Are you building a boat in your living room???? :shock: :lol:

Post Reply