Camp-boat
-
- Site Admin
- Posts: 4915
- Joined: Fri Jun 18, 2004 8:14 pm
- Type of boat I like: Wooden
- Location: Greensboro, NC
- Contact:
Re: Camp-boat
oops. Thought I replied in the email. Yes got them. Pretty straight-forward design. What changes were you looking for?
-Matt. Designer.
-
- Posts: 69
- Joined: Sat Aug 23, 2008 9:39 am
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Albany, GA
Re: Camp-boat
If I did it, the only change I'd look to do would probably be a scale up between 10-15%. The freeboard is so low in the back that I'm afraid it would handle zero chop(maybe less). I've got the plans for the other one on the way to compare. Should be here early next week.
You've got to admit, it's an intriguingly simple design. If it comes to it, could you develop the hull panels or would it be just as easy to measure from the frames do you think?
Thanks.
Jbo
You've got to admit, it's an intriguingly simple design. If it comes to it, could you develop the hull panels or would it be just as easy to measure from the frames do you think?
Thanks.
Jbo