Native Ultimate Plans

Area for ideas about designs you want to see. Guests welcome to post!
tx river rat
Posts: 989
Joined: Wed Feb 21, 2007 10:48 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Tx

Native Ultimate Plans

Post by tx river rat »

Ultimant 14.5
Did you ever draw thaat boat up and if you did what were the measurements.
Ron
Opps put this i the wrong place
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: Plans

Post by jem »

13'6 x 32. James was prototyping, even had it stitched together, but had a something come up to where he had to stop.
-Matt. Designer.
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: Native Ultimate Plans

Post by jem »

Here's the pics I have of the project in no particular order. Like I said, James had to break off this project for family matters and FAMILY COMES FIRST!

Hopefully he get things back on track in the coming months but I'd rather have him burn the prototype rather than not take care of family needs first.


Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
-Matt. Designer.
hairymick
Design Reviewer
Posts: 1965
Joined: Wed Jan 04, 2006 8:54 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Queensland, Australia
Contact:

Re: Native Ultimate Plans

Post by hairymick »

Dang it Matt!!

Now ya done got me wanting to build this one too.
Regards,
Mick

JEMWATERCRAFT Swampgirl; Wadefish;Touring Pirogue;South Wind; P5 ;
Laker X 2, Sasquatch 16.5 T-V 15 Okwata 15:
Cobia 15 (under construction)
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: Native Ultimate Plans

Post by jem »

Anyone else want to give it a go? If you've built before and are serious about building this model, I'll give you the plans for FREE. 8)

Contact me via email or PM.

Mick, not you. I'll have Robin sending me nasty emails if you start another boat any time soon. :P :twisted:
-Matt. Designer.
shawnkfl
Posts: 49
Joined: Mon Jan 26, 2009 6:33 pm
Type of boat I like: Canoes and Kayaks
Location: Largo, Florida

Re: Native Ultimate Plans

Post by shawnkfl »

what's the allure of this hull? it seems like it would track great but be a bear to turn. i like it though. i may build one, but i've got two to get finished first. first of which, gets started tomorrow morning!
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: Native Ultimate Plans

Post by jem »

The pontoon effect let's the hull sit deeper in the water and provide excellent stability.
-Matt. Designer.
shawnkfl
Posts: 49
Joined: Mon Jan 26, 2009 6:33 pm
Type of boat I like: Canoes and Kayaks
Location: Largo, Florida

Re: Native Ultimate Plans

Post by shawnkfl »

true. that would deffinately be a tough one to flip! that hull would be perfect around the mangroves here and in tampa bay. with the tunnel, you could even build a motor box and mount an electric motor right through the tunnel at any point through the tunnel. it looks like it would be a pretty sweet sailing rig as well. i like it.
AustinPynes
Posts: 35
Joined: Sat May 17, 2008 10:35 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Austin, Texas
Contact:

Re: Native Ultimate Plans

Post by AustinPynes »

While I am waiting to start my second boat the Wadefish, I would love to check out the plans to this one. I am hoping this summer to be able to get serious again.
AustinPynes
Swamp Girl Complete
Wadefish delayed
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: Native Ultimate Plans

Post by jem »

If you're ready to start cutting, shoot me an email.
-Matt. Designer.
Post Reply