Freedom 13

Builder show and discuss their progress.
woodynfla
Posts: 16
Joined: Fri Sep 04, 2009 8:45 am
Type of boat I like: Freedom 13
Contact:

Freedom 13

Post by woodynfla »

Well, here goes. Got the plans several weeks ago, mulled 'em over, email'd Matt a couple of times with questions, so it's time to cut bait.
My situation is a little different from many. I have limited space (one of the reasons I chose the 13) and only basic tools. I have a leg up, having build a kayak from free plans found on the internet, so I've been through it once already. It came out ok, in that it floated...less stable than I was comfy with however, due to the rounder bottom.
If you're doing a 13, or similar, feel free to chime in here with your pix etc. Not that I'll be of much help. But the sages that hang out here are pretty good. :D

http://s560.photobucket.com/albums/ss45 ... ept004.jpg

http://s560.photobucket.com/albums/ss45 ... ept017.jpg

Since I can't figure out how to put pix inside my message, this'll have to do until I can get smarter re: computer stuff.
"We're all ignorant. We're just ignorant about different things."
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: Freedom 13

Post by jem »

pics are a little over sized. That's why they don't show up. But links work.
-Matt. Designer.
preacher
Posts: 213
Joined: Fri Feb 27, 2009 12:37 am
Type of boat I like: Cape Fear SOT
Location: Balch Springs, Texas

Re: Freedom 13

Post by preacher »

That thing looks like it's a mile wide. WOW! Good luck on your build.
woodynfla
Posts: 16
Joined: Fri Sep 04, 2009 8:45 am
Type of boat I like: Freedom 13
Contact:

Re: Freedom 13

Post by woodynfla »

lol, preacher...only about 20" at the hull. it's a work in progress, that's just the pile of cut panels of course :wink:
"We're all ignorant. We're just ignorant about different things."
woodynfla
Posts: 16
Joined: Fri Sep 04, 2009 8:45 am
Type of boat I like: Freedom 13
Contact:

Re: Freedom 13

Post by woodynfla »

Just added some more pix at photobucket.

http://s560.photobucket.com/albums/ss45 ... edom%2013/
"We're all ignorant. We're just ignorant about different things."
MakoML
Posts: 10
Joined: Thu Mar 13, 2008 5:44 pm

Re: Freedom 13

Post by MakoML »

Have you finished the Freedom 13 and taken it for a test cruise yet? I'm curious to hear out it handles etc.
woodynfla
Posts: 16
Joined: Fri Sep 04, 2009 8:45 am
Type of boat I like: Freedom 13
Contact:

Re: Freedom 13

Post by woodynfla »

It's nearly there...I kinda modified the cockpit to fit my rather large girth, and added a hatch in the aft deck for a small cooler and junk. Pix soon. Put the lid on just today.

p.s. general info...I used the Duckworks "Small Boat Kit" of their MarinePoxy, which works very nicely...I choose the 'medium' hardner, which wasn't too good an idee here in Central Florida, U.S.A. The last few months, it's been 80 F and higher outside, and I enjoyed about a 5 minute working time with the stuff....reordered a kit with 'slow' hardner and had a much easier go of it. Of course, right about then the weather turned, and it's about 65 outdoors now. Can't win. :roll:
"We're all ignorant. We're just ignorant about different things."
woodynfla
Posts: 16
Joined: Fri Sep 04, 2009 8:45 am
Type of boat I like: Freedom 13
Contact:

Re: Freedom 13

Post by woodynfla »

Slow going...having to go to work sure interferes with things...added a couple pix to my photobucket...

http://s560.photobucket.com/albums/ss45/woodynfla34482/

Got the deck on, almost-last epoxy today. Will probably go put it in the water tomorrow. More pix also soon
"We're all ignorant. We're just ignorant about different things."
woodynfla
Posts: 16
Joined: Fri Sep 04, 2009 8:45 am
Type of boat I like: Freedom 13
Contact:

Re: Freedom 13

Post by woodynfla »

OK, hope I got this right...about finished with my little Freedom...still some trim work and etc. but I put it in the water yesterday. I can see the thumbnails in "Preview" mode, so if they can't be seen, let me know. Basically I dumped 'em all into Photobucket and picked up their "Generated HTML, Ebay and IMG Code", so this sounds right.


Image
Image
Image
Image
Image

Oh, and my webspace is http://earthandsky.embarqspace.com/

--Same pix, but some words of wisdom from moi !
"We're all ignorant. We're just ignorant about different things."
MakoML
Posts: 10
Joined: Thu Mar 13, 2008 5:44 pm

Re: Freedom 13

Post by MakoML »

So if the seat was raised up around 6 inches, how stable would the boat be? Could you stand up in it reasonably well?
Post Reply