Plastic chaulk tubes

Post your own building tips and "how to" ideas here.
Post Reply
LEE SCHNEIDERMANN
Posts: 220
Joined: Tue May 08, 2007 10:31 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Cedar Rapids, Iowa

Plastic chaulk tubes

Post by LEE SCHNEIDERMANN » Thu Dec 13, 2007 11:08 pm

I noticed that epoxy doesn't really "stick" to plastic. that gave me an idea for recycling all those plastic chaulk tubes I've been throwing away.(I'm painting my house)
Anyway, I cut the neck of the spout to 1/4 inch allowing me to stick a two foot piece of 1/4" metal rod in. I simply pushed the little plastic plunger out the back of the tube.
After a short hot water rinse I had a perfect dispenser for filling with"dookie schmutz" and do my tacking and fillets.
I've cleaned out several of these tubes so as one gets used, I set it aside until the epoxy sets. (I then repeat the clean-out process)
In the mean time I still have a tube or two to use for continuing the work.
I know a ziplock bag is pretty easy too, but I like the precision control of my chaulk gun to apply the "dookie".

Lee
There are three kinds of people in this world.
Those who can do math, and those who can't.

User avatar
jem
Site Admin
Posts: 4859
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Post by jem » Thu Dec 13, 2007 11:14 pm

Great tip!

I've heard of some builders buying the empty tubes to apply the goop.
-Matt. Designer.

fransjoe
Posts: 21
Joined: Sun Sep 19, 2010 9:32 pm
Type of boat I like: SOT Fishing Kayaks

Re: Plastic chaulk tubes

Post by fransjoe » Thu Sep 23, 2010 2:00 am

I checked out West Marine the other day and they actually sell the tubes for epoxy now, definitely a bit of a mess saver as well as giving you precision when applying either a Tack Weld, or filleting.
A rough day on the water beats any day at work

User avatar
preacher
Posts: 213
Joined: Fri Feb 27, 2009 12:37 am
Type of boat I like: Cape Fear SOT
Location: Balch Springs, Texas

Re: Plastic chaulk tubes

Post by preacher » Thu Oct 07, 2010 11:25 am

I ordered and use some of these from US Composites. I found some difficulties in loading the tubes and burping the air out that is trapped between the fillet material and the push thingy (hope thats not too technical). I'm thinking about drilling a small hole in the side of the tube at the top level of the fillet material to let the trapped air escape, more to come on that. I also cut the length of my tubes in half. I clean the tubes up with vinegar and reuse them with no trouble and they do lay down a very neat fillet. But, you need to practice your first works in areas that will be under decks or inside SOT layers.

Be quick to immediately release any pressure (whether hand pushing or using a gun) after laying your fillet because residual pressure "keeps on pushing" when you don't want it. Also have a paper towel in your off hand to catch the drips when that happens.

I built a "loading platform" by drilling a hole in a piece of 2"X4" and standing the caulk tube nozzel first up right in the hole.

User avatar
Oldsparkey
Design Reviewer
Posts: 1271
Joined: Sat Jun 19, 2004 11:08 am
Type of boat I like: Wood boats .
Location: Somewhere around Central Florida
Contact:

Re: Plastic chaulk tubes

Post by Oldsparkey » Fri Oct 08, 2010 7:39 pm

As you fill it tap the nozzle to settle the fillet material inside the tube.
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler

User avatar
pogue3one
Posts: 64
Joined: Fri Jun 22, 2007 5:15 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Katy, TX

Re: Plastic chaulk tubes

Post by pogue3one » Wed Dec 08, 2010 12:31 pm

Found this icing syringe on ebay for $2.00
Image
Wadefish (complete)

firestang
Posts: 27
Joined: Wed Apr 07, 2010 10:30 pm
Type of boat I like: wadefish

Re: Plastic chaulk tubes

Post by firestang » Sat Apr 16, 2011 6:58 pm

this is what ive been using for tacking
Image

Post Reply