Black Friday Preview: Sabalo 12

Info about our Products and Services
User avatar
jem
Site Admin
Posts: 4871
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Black Friday Preview: Sabalo 12

Post by jem » Sat Nov 12, 2011 8:07 pm

If boat plans were a literary novel, a 12' SOT would be my white whale.

I can't tell you how hard I've fought to get this one just right. It's not the same as Scott's prototype Blue Fin 12. I doubt I'll ever publish those. It was perfect for Scott but I don't feel the plans would be a good fit for everyone. It had some custom features that would be hard to draw (Scott built from a kit) among other things. But a lot of that design is in this one. I started over probably 7 times to get it just right.

It's 12' x 30" and will hold 275 on board with no water coming up the scuppers. Hull weight will be 45-55 pounds depending on wood chosen. If someone did strip-stitch with red cedar, they might .... MIGHT ... get under 40. And before someone says it: Yes I'm playing with a wood strip SOT but that's several weeks away from being a set of plans for sale.

Somethings different from the 15' version (besides the length and width):
-A single scupper is used in each spot instead of 2. I think 2 is overkill.
-There's a scupper in the seat area.
-The footwell is wider to allow for installing a console. It's not part of plans but if they are easy to design. You will have to work around the single scupper but should be easy to do.
-The internal framing is a bit different to make assembly easier. It's still a SOT and will take time to do. But it has improved.

If I get really crazy, it might be for sale this weekend. I've spent my entire Saturday on it so far so I'm tired. But I want it up for our annual Black Friday sale.

I really like this one. Hope you do too.

Image

Image

Image

Image

Image
-Matt. Designer.

Manjimike
Posts: 146
Joined: Fri Aug 25, 2006 7:28 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Manjimup, West Australia

Re: Black Friday Preview: Sabalo 12

Post by Manjimike » Sun Nov 13, 2011 7:43 am

Nice looking Matt, well done

User avatar
Oldsparkey
Design Reviewer
Posts: 1272
Joined: Sat Jun 19, 2004 11:08 am
Type of boat I like: Wood boats .
Location: Somewhere around Central Florida
Contact:

Re: Black Friday Preview: Sabalo 12

Post by Oldsparkey » Sun Nov 13, 2011 10:52 am

Really nice lines to it , one sharp looking paddle craft.
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler

Manjimike
Posts: 146
Joined: Fri Aug 25, 2006 7:28 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Manjimup, West Australia

Re: Black Friday Preview: Sabalo 12

Post by Manjimike » Sun Nov 13, 2011 6:12 pm

jem wrote:
Somethings different from the 15' version (besides the length and width):
-A single scupper is used in each spot instead of 2. I think 2 is overkill.
Does the Mirage drivewell "leak" enough to be a scupper?

Thanks
Mike

CC TX
Posts: 206
Joined: Wed Dec 15, 2004 10:35 pm
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Corpus Christi, TX

Re: Black Friday Preview: Sabalo 12

Post by CC TX » Sun Nov 13, 2011 8:12 pm

Manjimike wrote:Does the Mirage drivewell "leak" enough to be a scupper?

Thanks
Mike
Yes, you can eliminate the front scupper. However, you may want to reconfigure the slope of the floor if the drivewell is not against the bulkhead.
-----
David

Manjimike
Posts: 146
Joined: Fri Aug 25, 2006 7:28 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Manjimup, West Australia

Re: Black Friday Preview: Sabalo 12

Post by Manjimike » Sun Nov 13, 2011 8:32 pm

Thanks David

User avatar
PiratePete
Posts: 305
Joined: Fri Sep 11, 2009 6:57 am
Type of boat I like: Wadefish + Mirarge Drive.
Location: Tassie, Australia

Re: Black Friday Preview: Sabalo 12

Post by PiratePete » Mon Nov 14, 2011 2:17 am

Its quite a big hole in the bottom of your boat.

I sloped the floor of my Wadefish back to it & did away with the front scuppers altogether.

Image

Earvin
Posts: 116
Joined: Tue May 20, 2008 8:44 am
Type of boat I like: Okwata.
Location: Cundletown, NSW, Australia

Re: Black Friday Preview: Sabalo 12

Post by Earvin » Mon Nov 14, 2011 2:50 am

Looks great Matt. You are working hard. :P
Simon

"It is better to travel well than to arrive".

OneLastCast
Posts: 12
Joined: Sun Nov 13, 2011 9:20 pm
Type of boat I like: Sabalo 12
Location: Sydney

Re: Black Friday Preview: Sabalo 12

Post by OneLastCast » Mon Nov 14, 2011 4:52 am

Hi Matt, Forum members

New to the forum but thought it was time to chime in. I've been looking forward to Matt making this design available, and it definitely looks like it's going to be a great little fisher. I'm just going to go and google this "Black Friday" - hope it's soon.
Regards

Tony

Manjimike
Posts: 146
Joined: Fri Aug 25, 2006 7:28 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: Manjimup, West Australia

Re: Black Friday Preview: Sabalo 12

Post by Manjimike » Mon Nov 14, 2011 6:05 am

PiratePete wrote:Its quite a big hole in the bottom of your boat.

I sloped the floor of my Wadefish back to it & did away with the front scuppers altogether.

Image
Thanks Pete,
I knew it was large but wasn't sure how much it was taken up by the drive

Cheers

Mike

Post Reply