Stitch spacing on a tv-29

Ask your questions here. Guests welcome to post!
Post Reply
jackjama
Posts: 46
Joined: Tue Sep 14, 2010 5:39 pm
Type of boat I like: pirogue tv

Stitch spacing on a tv-29

Post by jackjama »

The plans say I can use 12 inch stitch spacing on pirogue. Is this true for my tv-29?

Also I thought I would us washers for my wire tie spacers. What size and thickness should I use?
Jackjama

Freedom 17
Pirogue TV 15-29 in progress
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: Stitch spacing on a tv-29

Post by jem »

The design doesn't matter so much as the thickness of plywood...with some exceptions. 10"-12" should work on yours just fine.

If you choose to do the optional stitch spaces, a fender washer or other thin washer will work. Thin as you can get it.
-Matt. Designer.
jackjama
Posts: 46
Joined: Tue Sep 14, 2010 5:39 pm
Type of boat I like: pirogue tv

Re: Stitch spacing on a tv-29

Post by jackjama »

Thanks,

I made my panels out of cedar strips. I will go with 10 inches.
Jackjama

Freedom 17
Pirogue TV 15-29 in progress
Post Reply