temptation
-
jem
- Site Admin
- Posts: 4916
- Joined: Fri Jun 18, 2004 8:14 pm
- Type of boat I like: Wooden
- Location: Greensboro, NC
- Contact:
temptation
-Matt. Designer.
-
Oldsparkey
- Design Reviewer
- Posts: 1272
- Joined: Sat Jun 19, 2004 11:08 am
- Type of boat I like: Wood boats .
- Location: Somewhere around Central Florida
- Contact:
Re: temptation
The seed of desire has been planted , the question is how long till the harvest when JEM Watercraft cuts there own kits. 
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
-
Mick
- Posts: 141
- Joined: Fri Feb 25, 2011 4:26 am
- Type of boat I like: Kayaks and canoes
- Location: Fraser Coast, Queensland, Australia
Re: temptation
Do it mate. 
-
rhutchinson
- Posts: 41
- Joined: Mon Jan 28, 2008 5:06 pm
- Type of boat I like: Kayaks and Canoes.
- Location: Middle Tenn.
Re: temptation
Wow! A giant step! I hope this comes true. ( Fathers Day is coming!!! ) 
Richard
Richard
The early bird may get the worm, but the second mouse gets the cheese in the trap !!!
-
neon14
- Posts: 181
- Joined: Tue Jul 13, 2010 8:19 pm
- Type of boat I like: SUP hybrid kayak
- Location: Center Point, Tx
Re: temptation
I have been wanting build one for years. About 12 years ago I assembled a shopbot cnc for a shop I used to work for, a 4x8 foot unit. Pretty nice machine but I never really got to mess with it. A few years later a friend hooked me up with a job running cnc lathes threading drill pipe and tubing. 30 plus feet of pipe hanging out of the back of the machine spinning on rollers while I cut the connection on the ends. It was crazy. After that I went to another shop that had 14 identical machines in one building cutting oilfield parts. In the AC, it was the best job I ever had. Then I moved. Now I drive a school bus! Funny thing is, the school I work at recently got a cnc plasma cutter. The kids are learning how to use it. Now thats cool.
I could see you really benefiting from a cnc router. Just go for it!
I could see you really benefiting from a cnc router. Just go for it!