epoxy/polyester bonding issues?

Ask your questions here. Guests welcome to post!
Post Reply
cjbfisher
Posts: 38
Joined: Thu Jul 07, 2011 10:45 pm
Type of boat I like: SOT fishing kayaks.

epoxy/polyester bonding issues?

Post by cjbfisher »

Hi guys,
I have a glass kayak that I am using while I (slowly) build my Sabalo. It is in need of a few minor repairs. My question is, will epoxy bond to polyester? Hopefully it will, because that's what I have. I don't fancy having to go and get some polyester for a couple of very small jobs.
Thanks,
Chris
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: epoxy/polyester bonding issues?

Post by jem »

With proper surface prep, it should.

-solvent wipe (acetone)
-sand/scuff surface with 100 grit abrasive cloth
-solvent wipe the area again until all dust is gone and let dry 5 minutes right before you're applying any epoxy.
-Matt. Designer.
cjbfisher
Posts: 38
Joined: Thu Jul 07, 2011 10:45 pm
Type of boat I like: SOT fishing kayaks.

Re: epoxy/polyester bonding issues?

Post by cjbfisher »

Thanks Matt.
Post Reply