Drive Well Project

Forum discussing building a well in a boat to mount fin drives.
Jeaux
Posts: 6
Joined: Sat Aug 31, 2013 5:35 pm
Type of boat I like: Sit on top kayak
Location: Montgomery TX / Montegut LA

Re: Drive Well Project

Post by Jeaux » Sat Sep 07, 2013 3:04 pm

Enjoying the read.
I am looking at building my Fade Wish (Wade Fish hull and deck with Blue Fin sole and cockpit) with a drive well.

Was the drive well used as the front scupper?

Thanks for sharing. Dale

User avatar
PiratePete
Posts: 305
Joined: Fri Sep 11, 2009 6:57 am
Type of boat I like: Wadefish + Mirarge Drive.
Location: Tassie, Australia

Re: Drive Well Project

Post by PiratePete » Sun Sep 08, 2013 4:56 am

Yes Dale I only used the drive well as the front scupper. I did put a little up turn in my seat box floor so the front of the well ran back to the front of the drive well.

There would be some pics & explanation in my Tassie Wadefish build.

Image

Jeaux
Posts: 6
Joined: Sat Aug 31, 2013 5:35 pm
Type of boat I like: Sit on top kayak
Location: Montgomery TX / Montegut LA

Re: Drive Well Project

Post by Jeaux » Sun Sep 08, 2013 3:48 pm

PiratePete wrote:Yes Dale I only used the drive well as the front scupper. I did put a little up turn in my seat box floor so the front of the well ran back to the front of the drive well.

There would be some pics & explanation in my Tassie Wadefish build.

Image
Will check your build notes. Thanks

Post Reply