JEM Watercraft

JEM Watercraft

Customer Service Forum
Direct Links To: Canoe Plans  --  Kayak Plans  --  Other Plans
 
It is currently Sun Nov 19, 2017 10:10 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Pirogue Seat Positions/height
PostPosted: Fri Aug 12, 2016 7:22 pm 
Offline

Joined: Mon May 02, 2016 8:33 pm
Posts: 4
Hi,
To start, I am a first time builder and have my 13' 9" pirogue to the touch up and trim out stage. I am in need of guidance on the seating. I know most pirogues don't have seats, but I am 72 years old and am not sure I can sit flat for an extended time (neither do I want to try it). How high on the sides can I put them? Thx in advance.
I would also like to say how much I enjoyed building this boat and reading the comments on this site.


Top
 Profile  
 
 Post subject: Re: Pirogue Seat Positions/height
PostPosted: Sat Aug 13, 2016 10:16 am 
Offline
Design Reviewer
User avatar

Joined: Sat Jun 19, 2004 11:08 am
Posts: 1271
Location: Somewhere around Central Florida
The height is your choice but the higher the seat is the higher the center of gravity will be and the tipper the boat becomes.
On a 12 inch side I like the seat at 6 inches or lower. One thing you might want to consider is a seat that is not attached to the pirogue but can be removed if you want it to be.

Here is the seat in one of Matt's ( Jem Watercraft) Freedom 15 Kayaks that I built .........

Image

I had a flat seat in mine and after a while it got uncomfortable so I designed a seat for the pirogue and it is at this link.
http://www.southernpaddler.com/phpBB3/v ... ?f=3&t=283

Chuck.........

_________________
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler


Top
 Profile  
 
 Post subject: Re: Pirogue Seat Positions/height
PostPosted: Sat Aug 13, 2016 1:24 pm 
Offline
Site Admin
User avatar

Joined: Fri Jun 18, 2004 8:14 pm
Posts: 4855
Location: Greensboro, NC
Chuck said it best.

I'd suggest to take some old phone books or blocks and try various heights to see what you're comfortable with. Also try different spots around midship. Usually if your hips are about 12" aft of center gives the best trim. But it's different for each builder.

_________________
-Matt. Designer.


Top
 Profile  
 
 Post subject: Re: Pirogue Seat Positions/height
PostPosted: Sat Aug 13, 2016 11:15 pm 
Offline

Joined: Mon May 02, 2016 8:33 pm
Posts: 4
Thanks for the help. I doubt if mine will look that good, maybe the next one.


Top
 Profile  
 
 Post subject: Re: Pirogue Seat Positions/height
PostPosted: Sun Aug 14, 2016 9:09 am 
Offline
Site Admin
User avatar

Joined: Fri Jun 18, 2004 8:14 pm
Posts: 4855
Location: Greensboro, NC
Bluefox wrote:
Thanks for the help. I doubt if mine will look that good, maybe the next one.

'
When you get to paddling regular, any "oops" you made become less visible to you.

_________________
-Matt. Designer.


Top
 Profile  
 
 Post subject: Re: Pirogue Seat Positions/height
PostPosted: Sun Aug 14, 2016 9:10 am 
Offline
Design Reviewer
User avatar

Joined: Sat Jun 19, 2004 11:08 am
Posts: 1271
Location: Somewhere around Central Florida
Bluefox wrote:
Thanks for the help. I doubt if mine will look that good, maybe the next one.


Beauty is in the eye of the beholder. Besides I always considered it a winner if any of mine floated. :lol: I found that if any mistakes were made ( I have made plenty ) and you don't point them out to anyone they never notice them. :D

Chuck.

_________________
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler


Top
 Profile  
 
 Post subject: Re: Pirogue Seat Positions/height
PostPosted: Mon Aug 15, 2016 8:33 am 
Offline

Joined: Sun Jul 20, 2014 4:10 pm
Posts: 10
Location: Texas and Kansas
For what it’s worth. The age thing had caught up with me and pirogue fishing about became a thing of the past. Some things that made it much easier at 73:

Light weight boat(s) ie, cedar strips and adapt chucks lightweight techniques. With some common sense.
you can build a safe usable lightweight boat.

A pull up strap works wonders for getting up and down. I just put a loop a rope fastened to the bow.

Experiment with seat position start low and work up. I use a Walmart seat that is lightweight and build a simple box to fasten it on with screws.

Hope you enjoy your pirogue many more years!


Imageimage hosting gif
mt

_________________
"To Them We Owe a Solemn Obligation"


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Template made by DEVPPL/ThatBigForum