8-Harness Satin Weave
-
- Design Reviewer
- Posts: 1186
- Joined: Sun Jun 20, 2004 8:03 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: South-central Michigan
You're probably right, Chuck. If I weren't so lazy, I'd walk down to the basement and re-read the instruction manual. sigh I know that there is a big difference in convenience for the builder with loose weave, and I found inconvenience with tight weave. Could be the klutz-factor.
Kayak Jack
Doing what you like is FREEDOM
Liking what you do is HAPPINESS
I spent most of my money on whiskey and women - and I'm afraid I just wasted the rest.
Doing what you like is FREEDOM
Liking what you do is HAPPINESS
I spent most of my money on whiskey and women - and I'm afraid I just wasted the rest.
-
- Posts: 130
- Joined: Wed Mar 15, 2006 9:06 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
We have only one weave. It looks like plain weave as best as I can tell. The thing I did notice which is probably true of loose weave is that threads get easily pulled causing irregular spacing. This particularly happens when the cloth is folded.
Has anyone had problems with these pulled threads?
Has anyone had problems with these pulled threads?
Louis
-
- Design Reviewer
- Posts: 1186
- Joined: Sun Jun 20, 2004 8:03 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: South-central Michigan
-
- Posts: 220
- Joined: Tue May 08, 2007 10:31 am
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Cedar Rapids, Iowa
re: wetting out the glass
I haven't read all the way through this, so maybe someone has already posted this one. When wetting out a large area I make a frame up and stretch aluminum screen over the frame. Hold the screen down on your work piece and roll out the epoxy into the glass, through the screening. With a little practice and patience while you get the hang of it , it keeps the glass in place while wetting. When I finish an area I just lift the frame and move on to the next dry area. Once enough area has been wetted, you can move back over any dry spots without pulling the glass out of place.
Lee the "hairy-tick"
Forgot to mention, I only use bright aluminum screen for this, not the painted charcoal colored stuff or the fiberglass kind.
Lee the "hairy-tick"
Forgot to mention, I only use bright aluminum screen for this, not the painted charcoal colored stuff or the fiberglass kind.
There are three kinds of people in this world.
Those who can do math, and those who can't.
Those who can do math, and those who can't.
-
- Design Reviewer
- Posts: 1272
- Joined: Sat Jun 19, 2004 11:08 am
- Type of boat I like: Wood boats .
- Location: Somewhere around Central Florida
- Contact:
I start in the middle and work to then outside with a roller , never had a problem with the glass moving.
Chuck.
Chuck.
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
-
- Posts: 220
- Joined: Tue May 08, 2007 10:31 am
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Cedar Rapids, Iowa
Yes but you don't live in the same sphere of mere mortals who look for the hard way to do EVERYTHING!Oldsparkey wrote:I start in the middle and work to then outside with a roller , never had a problem with the glass moving.
Chuck.
There are three kinds of people in this world.
Those who can do math, and those who can't.
Those who can do math, and those who can't.
-
- Design Reviewer
- Posts: 1272
- Joined: Sat Jun 19, 2004 11:08 am
- Type of boat I like: Wood boats .
- Location: Somewhere around Central Florida
- Contact:
Wrong , if there is a hard way of doing it ..... Trust me I will try it. I like to contribute it to good luck or dumb luck .. your choice. Anyway I use all of it up building boats because I can't hit one number on the Lotto much less all six.LEE SCHNEIDERMANN wrote:Yes but you don't live in the same sphere of mere mortals who look for the hard way to do EVERYTHING!Oldsparkey wrote:I start in the middle and work to then outside with a roller , never had a problem with the glass moving.
Chuck.
Chuck.
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler