I love the North wind ,
But what if you dropped everything 8 to 10%
A 16 by 26 inch wide boat.
Do you think it would keep its good qualitys .
Ron
What if
-
- Posts: 989
- Joined: Wed Feb 21, 2007 10:48 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Tx
-
- Posts: 989
- Joined: Wed Feb 21, 2007 10:48 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Tx
Re: What if
Ron
-
- Posts: 989
- Joined: Wed Feb 21, 2007 10:48 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Tx
Re: What if
This one I want to try some thing new . I want to build this one a full striper.
When you get time draw it up Matt.
Please sir
Ron
When you get time draw it up Matt.
Please sir
Ron
-
- Site Admin
- Posts: 4915
- Joined: Fri Jun 18, 2004 8:14 pm
- Type of boat I like: Wooden
- Location: Greensboro, NC
- Contact:
Re: What if
I'll put them at the front of the to-do list if you prototype a "unique" but simple canoe for me. But you have to build to spec.
-Matt. Designer.
-
- Posts: 989
- Joined: Wed Feb 21, 2007 10:48 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Tx
Re: What if
I have to build it to specs ,hum I dont know if I can do that never built one that way before.
Ron
Ron
-
- Posts: 989
- Joined: Wed Feb 21, 2007 10:48 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Tx
Re: What if
Matt
Send me the specs on the canoe.
Which is easier for you to draw a full length panel stitch and glue or a full striper.
I would be happy with either one on this boat ,performance on the two North Winds is just about identical.
Ron
Send me the specs on the canoe.
Which is easier for you to draw a full length panel stitch and glue or a full striper.
I would be happy with either one on this boat ,performance on the two North Winds is just about identical.
Ron