1st Build 12' Piroque

Post your own building tips and "how to" ideas here.
Post Reply
PhaseFour
Posts: 3
Joined: Mon Nov 30, 2020 9:43 pm
Type of boat I like: Medium size power boat

1st Build 12' Piroque

Post by PhaseFour »

New at this uploading scheme and using Snapfish for the first time. Didn't work. I used the "Tricks and Tips" recommendations for uploading but couldn't make it work. I'm new to this site and have never uploaded pics here. Do I need additional authorization for pics? Any suggestions?
Deep Sea!
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: 1st Build 12' Piroque

Post by jem »

pics are limited too 800 x 800 pixels. Can you provide the link and I'll check it out?
-Matt. Designer.
PhaseFour
Posts: 3
Joined: Mon Nov 30, 2020 9:43 pm
Type of boat I like: Medium size power boat

Re: 1st Build 12' Piroque

Post by PhaseFour »

Hi Matt,

I tried to reply earlier with links to my pics but the reply didn't take. I'll try again so you may see two replies of the same info.

All 22 Pics: https://www.snapfish.com/share?via=link ... 0/SNAPFISH

Single Pic: https://www.snapfish.com/share?via=link&token=1FRQPY8E1HgklE1NgIzKbw/AUS/27951767177070/SNAPFISH

Thanks for your help on this. Please advise

Jim
Deep Sea!
jem
Site Admin
Posts: 4915
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: 1st Build 12' Piroque

Post by jem »

I made the album a link people can click to view.
-Matt. Designer.
PhaseFour
Posts: 3
Joined: Mon Nov 30, 2020 9:43 pm
Type of boat I like: Medium size power boat

Re: 1st Build 12' Piroque

Post by PhaseFour »

Thanks for the help Matt.

I really had fun building this (My first) boat. I think it is a great starter boat for the first timer. Taught me a lot but I still have much more to learn.

My next boat will be a 14' Pacific Power Dory (Seneca by Jeff Spira) for a completely different build technique. Morten Olesen's 17' Motorboat Mark V will follow the Dory. I hope to have the 17' Motorboat in the water by spring/summer of 2022.

Thanks again for your help Matt;

Jim
Deep Sea!
Post Reply