Hello,
anyone knows the size of the central panel which used goanywhere. I refer to what I said at the end of the cockpit to make ice/fish box between the cockpit and tankwell
I would do the same thing for my sabalo 15.
thank you and sorry for writing errors
edoardo
frame for sabalo 15
Re: frame for sabalo 15
Hello Jem and thanks for the reply. I'm sorry, but i do not understand.
this is not on the plans. in the plans we have two temp frame forward cockpit and one for the tankwell.
I refer to the frame to be installed at the end of the frame cockpit near tankwell
this is not on the plans. in the plans we have two temp frame forward cockpit and one for the tankwell.
I refer to the frame to be installed at the end of the frame cockpit near tankwell
-
- Site Admin
- Posts: 4915
- Joined: Fri Jun 18, 2004 8:14 pm
- Type of boat I like: Wooden
- Location: Greensboro, NC
- Contact:
Re: frame for sabalo 15
If you email me at info@jemwatercraft.com I'll send you a drawing of a frame tht can fit right behind the cockpit to create a seale compartment.
-Matt. Designer.
Re: frame for sabalo 15
ok. thanks, jem
-
- Posts: 401
- Joined: Fri Jul 18, 2008 10:12 am
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Seaford, South Oz
Re: frame for sabalo 15
Matt, I'm not certain but I think Edoardo is interested in copying the cockpit / ice box built into the Sabalo built by member Goanywhere as shown on the page in the link below.
viewtopic.php?f=8&t=3426&start=130
Edoardo, is this what you are asking about?
viewtopic.php?f=8&t=3426&start=130
Edoardo, is this what you are asking about?
Cheers, Bob
Laker 13 - christened and slimed (just).
Laker accessories underway.
Laker 13 - christened and slimed (just).
Laker accessories underway.
Re: frame for sabalo 15
Sorry.
I intend to fiberglassing before the inner hull completely. cutting for the mirage drive must be done before or after?
thank you
I intend to fiberglassing before the inner hull completely. cutting for the mirage drive must be done before or after?
thank you