new Laker 13 in Sth Australia

Per request from the many Laker builders, the section is dedicated to braggin' about your Laker kayak.
Post Reply
build_it
Posts: 10
Joined: Thu Jan 03, 2008 11:55 pm

new Laker 13 in Sth Australia

Post by build_it »

I'm finishing a Laker 13 I had cut out panels for in 2008 but life, the universe and 16 shades of crap stopped me from going further.Last Friday I restarted the project by covering the panels with west system. I now have the hull ready for filleting so things are happening again at a reasonable pace and its starting to look like a kayak.
Cheers for now
Pete
jem
Site Admin
Posts: 4913
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

Re: new Laker 13 in Sth Australia

Post by jem »

like fine, aged wine... 8)
-Matt. Designer.
build_it
Posts: 10
Joined: Thu Jan 03, 2008 11:55 pm

Re: new Laker 13 in Sth Australia

Post by build_it »

yep the ply is perfectly seasoned now. :P
Pete
build_it
Posts: 10
Joined: Thu Jan 03, 2008 11:55 pm

Re: new Laker 13 in Sth Australia

Post by build_it »

And now the inside fillets are done. Time to turn it over tomorrow and continue the process. :D
build_it
Posts: 10
Joined: Thu Jan 03, 2008 11:55 pm

Re: new Laker 13 in Sth Australia

Post by build_it »

Today I put fibreglass tape on the inside seams of the deck halves.I'll do the other sides tomorrow and maybe the hull as well weather permitting
Its hot and a hot dusty wind making working on the boat miserable so called it a day. now relaxing under the a/c with a cool beverage next to me. :D
Pete
build_it
Posts: 10
Joined: Thu Jan 03, 2008 11:55 pm

Re: new Laker 13 in Sth Australia

Post by build_it »

Today I finished taping the outside seams. Tomorrow I hope to get started on painting the insides and the under deck bits then hopefully placing the deck in position and getting it ready for gluing into place. :D
Pete
oldbuffpilot
Posts: 20
Joined: Sun Jul 20, 2014 4:10 pm
Type of boat I like: pirogue for fishing
Location: Texas and Kansas

Re: new Laker 13 in Sth Australia

Post by oldbuffpilot »

It's good to know there's someone out there building
"To Them We Owe a Solemn Obligation"
build_it
Posts: 10
Joined: Thu Jan 03, 2008 11:55 pm

Re: new Laker 13 in Sth Australia

Post by build_it »

only way to get the boat design you want thats not plastic. :D
Pete
Post Reply