Cutting corners!

Per request from the many Laker builders, the section is dedicated to braggin' about your Laker kayak.
Posts: 13
Joined: Wed Apr 07, 2010 8:25 am
Type of boat I like: Wood and SOF kayaks.

Re: Cutting corners!

Post by Graybeard »

Nice detail. I think if I saw that on the plans it would intimidate me. Good to see you found a way to fix a problem and make the boat your own.
john the pom
Posts: 192
Joined: Mon Nov 12, 2007 8:12 am
Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
Location: S.E. Queensland

Re: Cutting corners!

Post by john the pom »

Thanks GB, have to say the initial putting the saw into it was done with some trepidation, however its coming up well. Itsa bit like going back to the building of it. Every five minutes work accompanied by about an hour of thought. One of the bonuses was that a lot of lumps n bumps that should have been sanded out originally were got around to :roll:
Cheers John.
Post Reply