temptation

Worth mentioning but don't fit in other categories.
Post Reply
jem
Site Admin
Posts: 4913
Joined: Fri Jun 18, 2004 8:14 pm
Type of boat I like: Wooden
Location: Greensboro, NC
Contact:

temptation

Post by jem »

-Matt. Designer.
Oldsparkey
Design Reviewer
Posts: 1272
Joined: Sat Jun 19, 2004 11:08 am
Type of boat I like: Wood boats .
Location: Somewhere around Central Florida
Contact:

Re: temptation

Post by Oldsparkey »

The seed of desire has been planted , the question is how long till the harvest when JEM Watercraft cuts there own kits. :wink:
Remember:
Amateurs built the Ark...... Professionals built the Titanic
Visit some fine paddlers at The Southern Paddler
Mick
Posts: 141
Joined: Fri Feb 25, 2011 4:26 am
Type of boat I like: Kayaks and canoes
Location: Fraser Coast, Queensland, Australia

Re: temptation

Post by Mick »

Do it mate. :D
rhutchinson
Posts: 41
Joined: Mon Jan 28, 2008 5:06 pm
Type of boat I like: Kayaks and Canoes.
Location: Middle Tenn.

Re: temptation

Post by rhutchinson »

Wow! A giant step! I hope this comes true. ( Fathers Day is coming!!! ) :lol:

Richard
The early bird may get the worm, but the second mouse gets the cheese in the trap !!!
neon14
Posts: 181
Joined: Tue Jul 13, 2010 8:19 pm
Type of boat I like: SUP hybrid kayak
Location: Center Point, Tx

Re: temptation

Post by neon14 »

I have been wanting build one for years. About 12 years ago I assembled a shopbot cnc for a shop I used to work for, a 4x8 foot unit. Pretty nice machine but I never really got to mess with it. A few years later a friend hooked me up with a job running cnc lathes threading drill pipe and tubing. 30 plus feet of pipe hanging out of the back of the machine spinning on rollers while I cut the connection on the ends. It was crazy. After that I went to another shop that had 14 identical machines in one building cutting oilfield parts. In the AC, it was the best job I ever had. Then I moved. Now I drive a school bus! Funny thing is, the school I work at recently got a cnc plasma cutter. The kids are learning how to use it. Now thats cool.

I could see you really benefiting from a cnc router. Just go for it!
Post Reply