![Smile :)](./images/smilies/icon_smile.gif)
Stalker build log
-
- Posts: 229
- Joined: Tue Apr 25, 2006 3:00 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Lutz-Steinhatchee, FL
- Contact:
Re: Stalker build log
Great! Well at least you have been busy
Are you going to try to make this thing in two haves and then splice it together? Instead of scabbing the haves first into long pieces and then stitching it up? If so, that seems like that would be a lot more difficult?
![Smile :)](./images/smilies/icon_smile.gif)
Tight Lines, Steve
-
- Posts: 12
- Joined: Thu Jan 17, 2013 11:48 pm
- Type of boat I like: JEM Stalker
- Location: Goulburn, NSW, Australia
Re: Stalker build log
I think the perspective of that photo might be throwing you off but that's all 14' of boat right there. Panels are already scarfed together but the angle of that shot makes it look shorter than it actually is.
-
- Posts: 229
- Joined: Tue Apr 25, 2006 3:00 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Lutz-Steinhatchee, FL
- Contact:
Re: Stalker build log
Ok, I took a second look, my bad, I was thinking what the heck,
anyway, get it done, you will have a ball fishing out of it.
![Smile :)](./images/smilies/icon_smile.gif)
Tight Lines, Steve
-
- Posts: 401
- Joined: Fri Jul 18, 2008 10:12 am
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Seaford, South Oz
Re: Stalker build log
Well, THERE'S your problem!
Spring is certainly having a go so, yes, summer will be here before you know it. Hopefully it will be on the water in time to get some use this season.
Where will you use it - rivers and lakes or the sea?
Cheers, Bob
Laker 13 - christened and slimed (just).
Laker accessories underway.
Laker 13 - christened and slimed (just).
Laker accessories underway.
-
- Posts: 12
- Joined: Thu Jan 17, 2013 11:48 pm
- Type of boat I like: JEM Stalker
- Location: Goulburn, NSW, Australia
Re: Stalker build log
Hi Bob,
I'm in Goulburn NSW (between Sydney and Canberra), and hopefully it'll see some pretty varied use. Here in town it's fun just to put in on the local river of an afternoon and give the redfin population a hard time. Canberra is only a stone's throw away and I'm there a lot, and it has quite a few lakes that are stocked regularly with natives, and also full of redfin and carp. I also spend quite a bit of time on the south coast around Bateman's bay so plenty of estuary use as well.
Bass are my favourite species though, and I have grand plans to have a few overnight trips up the Shoalaven River this summer in search of them. I could do it on my kayak, but this boat will mean much more storage for gear, and I could bring my wife or a kid along for the trip.
I'm in Goulburn NSW (between Sydney and Canberra), and hopefully it'll see some pretty varied use. Here in town it's fun just to put in on the local river of an afternoon and give the redfin population a hard time. Canberra is only a stone's throw away and I'm there a lot, and it has quite a few lakes that are stocked regularly with natives, and also full of redfin and carp. I also spend quite a bit of time on the south coast around Bateman's bay so plenty of estuary use as well.
Bass are my favourite species though, and I have grand plans to have a few overnight trips up the Shoalaven River this summer in search of them. I could do it on my kayak, but this boat will mean much more storage for gear, and I could bring my wife or a kid along for the trip.
-
- Posts: 229
- Joined: Tue Apr 25, 2006 3:00 pm
- Type of boat I like: <-- Please read instructions to the left and delete this text. Then, tell us what type boat you like! :-)
- Location: Lutz-Steinhatchee, FL
- Contact:
Re: Stalker build log
Now were talking. Now that you have it this far you will be a lot more motivated to get her done! Looking good.
Tight Lines, Steve
-
- Posts: 12
- Joined: Thu Jan 17, 2013 11:48 pm
- Type of boat I like: JEM Stalker
- Location: Goulburn, NSW, Australia
Re: Stalker build log
The genius of my plan is that it's really in the way at the moment, but I can't move it or do anything with it until it's done, so I don't really have a choice
-
- Posts: 20
- Joined: Sun Jul 20, 2014 4:10 pm
- Type of boat I like: pirogue for fishing
- Location: Texas and Kansas
Re: Stalker build log
Congratulations on persistence! Looking good. It appears the crawdads I have built are similar.
Don't forget to put packing tape on the forms to keep the epoxy from sticking to the forms. I did that ONCE!
Andy
Don't forget to put packing tape on the forms to keep the epoxy from sticking to the forms. I did that ONCE!
Andy
"To Them We Owe a Solemn Obligation"
-
- Posts: 12
- Joined: Thu Jan 17, 2013 11:48 pm
- Type of boat I like: JEM Stalker
- Location: Goulburn, NSW, Australia
Re: Stalker build log
Haha, yeah I don't fancy permanent bulkheads in a canoe. Fortunately the forms have been taped up since 2013. They're actually out of the boat now and filleting is taking place to prep for fibreglassing. I'll have to take some more pics.oldbuffpilot wrote: ↑Sun Sep 30, 2018 8:46 am Don't forget to put packing tape on the forms to keep the epoxy from sticking to the forms. I did that ONCE!
Andy