Available: - Accessories - BHC - Boat Shelves - Blue Fin SOT - Buccaneer (2 sizes) - Cape Fear - Cape Fear SOT - Crawdad
- E-mail Plans - Eno - Freedom (6 Models) - DK Dingy - Iroquois (2 sizes) - Gander River - Lake Cruiser Canoe - Laker Kayak(3 sizes)
- Merrimac - Muskoka - Mini Skiff - North Wind (2 models) - Okwata (3 sizes) - Paddle Board - Pirogues - P-Row
- Sabalo SOT - Sasquatch (5 sizes) - South Wind (2 sizes) - Stalker Square Back - Swamp Girl (3 sizes) - Townsend - Trapper (3 sizes) - Wadefish SOT (2 sizes)
JEM Watercraft PO Box 39001 Greensboro, NC 27438 Ph: 336-580-2252 Fax: 866-430-0241 Email Us
Home » Stitch and Glue Kayak Plans » Sit On Top Kayak Plans
Sabolo SOT 12-30
The Sabalo (also known as Silver King, Silver Sides, and Tarpon) is a large, hard fighting fish and is judged by many to be the worlds most exciting gamefish.
Inspired by the Wilderness Systems (tm) Tarpon, our Sabalo is designed to be the ideal fishing kayak.
Specifications
Overall Dimensions
Heights: Bow, Mid, Stern
*Hull weight will depend on the quality of materials selected and skill of the builder.
The stern has a small transom located above the waterline for paddling efficiency and help prevent stern "squatting" if you are punching over a big wave. The cockpit and tankwell are both self-bailing which provides for excellent safety in the event you take on water. Sound judgment and paddling skill are still requirements.
The stern has a small transom located above the waterline for paddling efficiency and help prevent stern "squatting" if you are punching over a big wave.
The cockpit and tankwell are both self-bailing which provides for excellent safety in the event you take on water. Sound judgment and paddling skill are still requirements.
Always wear your Personal Floatation Device! Bill of Materials Plywood: 4 mm thickness 4 sheets -- Epoxy: resin with hardener (includes 15% waste factor) 2.0 gallons 7.6 liters Fiberglass Tape: 6-ounce, 3" wide [170 gm2, 10 cm] 8 yards 7 meters Fiberglass Cloth: 6-ounce, 50" wide [170 gm2, 127 cm] 18 yards 16.5 meters Filler (woodflour, fumed silca, etc) 2 quarts 2 liters Click here to download a complete Bill of Materials that includes a materials list for different build options. Cost: Total cost of the build will range from about $350 up to $700 depending on the options and materials selected. If you are interested in a CNC cut marine plywood kit. Cost of this plywood-only kit will be about $449 delivered to your door (with in the United States). Contact us for a specific quote. Labor: The hull can be built in 30-45 hours. Up to 20 hours to fair and paint depending on the desires and skills of the builder. Please note these are "hands on" hours. They do not include time waiting for epoxy and paint/varnish to cure. More: Visit our Customer Service forum and see what others are saying about our designs. Our Plans Include: Simple to follow, detailed drawings of each panel with all dimensions required to layout and cut from flat plywood sheets. Drawings list Plan and Profile Panel drawings on 11" x 17" paper. Metric and U.S. Standard units included. Full scale paper patterns of selected curves that would be hard to draw. Specific assembly instructions for this boat. Bill Of Materials.
Always wear your Personal Floatation Device!
Bill of Materials
Fiberglass Tape: 6-ounce, 3" wide [170 gm2, 10 cm]
Filler (woodflour, fumed silca, etc)
Click here to download a complete Bill of Materials that includes a materials list for different build options.
Cost: Total cost of the build will range from about $350 up to $700 depending on the options and materials selected. If you are interested in a CNC cut marine plywood kit. Cost of this plywood-only kit will be about $449 delivered to your door (with in the United States). Contact us for a specific quote. Labor: The hull can be built in 30-45 hours. Up to 20 hours to fair and paint depending on the desires and skills of the builder. Please note these are "hands on" hours. They do not include time waiting for epoxy and paint/varnish to cure. More: Visit our Customer Service forum and see what others are saying about our designs. Our Plans Include: Simple to follow, detailed drawings of each panel with all dimensions required to layout and cut from flat plywood sheets. Drawings list Plan and Profile Panel drawings on 11" x 17" paper. Metric and U.S. Standard units included. Full scale paper patterns of selected curves that would be hard to draw. Specific assembly instructions for this boat. Bill Of Materials.
Cost: Total cost of the build will range from about $350 up to $700 depending on the options and materials selected. If you are interested in a CNC cut marine plywood kit. Cost of this plywood-only kit will be about $449 delivered to your door (with in the United States). Contact us for a specific quote.
Labor: The hull can be built in 30-45 hours. Up to 20 hours to fair and paint depending on the desires and skills of the builder. Please note these are "hands on" hours. They do not include time waiting for epoxy and paint/varnish to cure.
More: Visit our Customer Service forum and see what others are saying about our designs.
Our Plans Include:
« Previous | Next »
Home | Search | Checkout | Contact
- © JEM Watercraft 2019 -
JEM Watercraft - Canoe plans, kayak plans, and other boat plans.